Firmware: Chameleon (1.0.41) Firmware [18 APR 2016] | Gecko (20151106) Firmware [13 NOV 2015]


Post Reply 
configure the OHC A(V
02-20-2015, 04:53 PM
Post: #1
configure the OHC A(V
as i must configure the OHC to see material in SD iso type of DVD and HD type 1080p mkv, to have less possible stutter in the video just mentioned?
thank you
Find all posts by this user
Add Thank You Quote this message in a reply
02-21-2015, 02:16 PM
Post: #2
RE: configure the OHC A(V
Good network I think.

Some focus on problems and faults others on solutions and success... no question who is the happy one.

Chameleon 16GB SD 32GB micro SD <-->HDMIv1.3<-->Onkyo TX-NR1010<-->HDMIv1.3<-->Panasonic TX-P46S10 + 6 Bowers & Wilkins speakers.
10 NTFS 2TB USB drives on 3 hubs attached to a A400, 2 Seagate blackarmour NAS 3TB, 2 Seagate Central NAS 4TB.
Find all posts by this user
Add Thank You Quote this message in a reply
02-22-2015, 03:01 PM
Post: #3
RE: configure the OHC A(V
I would use SPMC for playback. In settings make sure you set to ALWAYS adjust output to match input video fps.

Also set your display setting to match the max resolution of your TV.

Finally provide as much detail as you can in your post to get the most tailored and best replies. Hardware, connections, settings, software, etc.
Find all posts by this user
Add Thank You Quote this message in a reply
[+] 1 user says Thank You to chris57 for this post
02-24-2015, 12:47 PM
Post: #4
RE: configure the OHC A(V
(02-22-2015 03:01 PM)chris57 Wrote:  I would use SPMC for playback. In settings make sure you set to ALWAYS adjust output to match input video fps.

Also set your display setting to match the max resolution of your TV.

Finally provide as much detail as you can in your post to get the most tailored and best replies. Hardware, connections, settings, software, etc.
SPMC use for playing DVD ISO and mkv 1080p or 720p. audio and video only HDMI TV. the TV is a full HD (1920X1080) set to 24p on. OHC firmware 1.0.13 video resolution 1080p-24Hz framerate sync enabled, audio HDMI Bitstream. what should I change sull'OHC and what should I set in SPMC to have less stuttering possible.
thank you
Find all posts by this user
Add Thank You Quote this message in a reply
02-24-2015, 02:52 PM
Post: #5
RE: configure the OHC A(V
set TV and OHC 1080p 60Hz framerate sync enabled

Some focus on problems and faults others on solutions and success... no question who is the happy one.

Chameleon 16GB SD 32GB micro SD <-->HDMIv1.3<-->Onkyo TX-NR1010<-->HDMIv1.3<-->Panasonic TX-P46S10 + 6 Bowers & Wilkins speakers.
10 NTFS 2TB USB drives on 3 hubs attached to a A400, 2 Seagate blackarmour NAS 3TB, 2 Seagate Central NAS 4TB.
Find all posts by this user
Add Thank You Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)