Firmware: Chameleon (1.0.41) Firmware [18 APR 2016] | Gecko (20151106) Firmware [13 NOV 2015]


Post Reply 
IR extender cable
12-10-2015, 10:39 PM
Post: #1
IR extender cable
Hello all!

New here and i have been searching here and googling but i cant seem to find a good IR extender cable. I can only find with a 3.5 teleplug. But the chameleon i guess needs a 2.5?

Does anyone know where i can find one or if anyone can confirm that it is indeed a 2.5?
Find all posts by this user
Add Thank You Quote this message in a reply
12-12-2015, 11:37 PM
Post: #2
RE: IR extender cable
I just found an old IR extender from the C200 days, part of the IRK200 kit. I'll try that when I get time.

OHC > HDMI > TV (Panasonic 42G20)
Downmix stereo using standard Kodi(MC) 15.2 no hware/acc OK
Downmix stereo 1.0.40/RK Kodi(RKlib) 15.2 infrequent audio gaps hware/acc OK

No DTS downmix available for inbuilt eMC player

Gecko> HDMI > TV (Panasonic 42G20)
Downmix stereo using Gecko Kodi 15.0 OK
Downmix using inbuilt MediaCentre OK

Find all posts by this user
Add Thank You Quote this message in a reply
12-23-2015, 10:23 AM
Post: #3
RE: IR extender cable
The IR extender from the 200 NMT days does not fit in the hole. Obviously it was not going to work as the IR codes for the NMT are NEC and universal to the NMT series. I did however reaslise that my OHC remote worked on my Gecko and vice versa whilst playing around. So OH remotes are also universal.

I would ask CM sales via their website contact or support links.

OHC > HDMI > TV (Panasonic 42G20)
Downmix stereo using standard Kodi(MC) 15.2 no hware/acc OK
Downmix stereo 1.0.40/RK Kodi(RKlib) 15.2 infrequent audio gaps hware/acc OK

No DTS downmix available for inbuilt eMC player

Gecko> HDMI > TV (Panasonic 42G20)
Downmix stereo using Gecko Kodi 15.0 OK
Downmix using inbuilt MediaCentre OK

Find all posts by this user
Add Thank You Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)